As an Amazon Associate, we may earn commissions from qualifying purchases from Amazon.com. Know more.

Learning how to thread a needle easily is the first step in most sewing projects, regardless of how big or tiny they are. A seemingly impossible task can be accomplished by pushing a slack thread through the needle’s eye.

It shouldn’t take up your precious sewing time, and it shouldn’t be hard to know how to thread a needle with a small eye. Eye magnifiers can aid, but they won’t be able to help with a strand of thread that appears to have its mind.

How to Thread a Needle Easily?

How to thread a needle single strand?

  • Use a needle large enough for your thread and trim the end so that the fibers don’t protrude from the needle’s eye during this initial stage. Next, create a fast knot at the end of the thread when you’ve completed the needlework. After that, you’re all set to get your hands dirty with some sewing.
  • Choose a needle that can handle the thickness of your thread. Then, hold the thread up to a needle’s eye to see if it’s the correct length for your sewing project. If the needle eye is smaller than the thread, it won’t be easy for you on how to thread a needle easily.
  • Make sure you acquire a variety of needles so that you can try a few until you locate the appropriate one. Take a close look at the needle’s tip as well. Depending on what fabric you’re sewing, you may require a sharp point needle or a blunt end.
  • Trim the end of at least one foot of thread before removing it from the spool. Then, remove as much thread as you need from the spool and cut it to the desired length.
  • Please make a small incision on one end of the thread with a pair of scissors so that you can thread it onto the needle with ease. This will ensure that the thread’s end is free of stray strands, resulting in a clean cut. Next, try licking the end of the thread to keep the fibers from unraveling and falling out.
  • The needle’s eye should be inserted into the end of the thread. Then, with your thumb and forefinger, hold the needle between your thumb and forefinger and thread’s end between your thumb and forefinger.
  • Afterward, insert the thread’s end into the eye. Thread the needle and play about with it. The end of the thread, for example, might be easier to grip when you push the needle’s eye onto the thread.
  • For tiny needles, try using a threading tool. If you’re having trouble getting the thread through the needle’s eye, especially if it’s small, get a needle threader at your nearest store.

How to thread a needle with a small eye?

  • The presser foot holder on newer sewing machines may be white. If your device has an integrated automatic needle threader, thread a needle with the typical silver presser foot holder. A quick cure is to place a dab of liquid paper or white-out directly behind the needle on the foot holder. Before sewing cloth, let it completely dry. Use simple white labeling behind the needle if you don’t have liquid paper.
  • When knowing how to thread a needle single strand, always use a pair of sharp scissors. Cleaning the thread of your needle is always easier than shredding it to shreds. In addition, using high-quality thread makes the operation much easier to accomplish. Using a 45-degree angle, snip the thread. Angled cuts must be made to avoid destroying heavier threads. Regardless of whether you can see the curve, it will significantly assist you in guiding the thread through the needle’s eye without difficulty.
  • A drop of water, saliva, or beeswax can be used to stiffen the end of a piece of thread that is too flimsy. Sewing using a hand-held sewing needle requires using beeswax and thread only. If you use it with a sewing machine needle, the mechanism will get clogged up. In a pinch, you can substitute candle wax. It’s as simple as dragging a thread through the resin. When working with a thread of average or poor quality, stiffening comes in handy.
  • With a bundle of hand-held sewing needles, you’ll often find an included needle threader. Sewing notions can be purchased separately from your local fabric store. Even if your stitching needle has a little eye, the huge-looped wire will provide you with a big eye to thread through. A needle threader can also be used with a machine needle.
  • Even with the best lighting, threading a sewing machine needle can be a challenge. In contrast, many mid-to-high priced sewing machines have built-in needle threaders, which are indispensable. The automatic needle threading option can be used in various ways from a lever that you operate to a push-button feature.

Securing a knot

  • Wrap the thread’s endpoint around your middle finger and secure it with a knot. The loose thread end can be held in place with your thumb against your middle finger. Afterward, wrap the thread around your middle finger to form a complete loop.
  • Your finger should be wrapped around your finger with both strands of thread if you used two. Then, using your thumb and middle finger, lick or dip them in water before wrapping the thread to produce friction, making it simpler to tie the knot.
  • For the knot, it’s helpful to add another layer of thread by rolling it two or three times. Again, your thumb and forefinger should be holding the thread in place. Your middle finger should then be moved in a circular motion toward the base of your thumb. Because you’ve coiled it up around itself, the thread should feel thicker in your hands.
  • Make a fist with the rolled thread. While keeping your thumb and middle finger on the thread, please do not allow it to slip away from your fingertips.
  • Create a knot by squeezing the thread hard. Keep your fingers firmly gripped on the thread as you draw the thread in the other direction with your other hand. An end knot will be formed from this procedure.
  • With thick thread, inserting the end of the thread through the loop that was twisted around your finger can help you produce a neater knot. Next, create a double overhand knot by re-looping it and pulling it tight.

thread-a-needle